solutions – Done Engineering and Service

Laser Alignment

Admin-rich — Tue, 05 Jan 2021 09:25:32 +0000

Fixturlaser NXA Pro
This is a masterpiece in usability – bringing the latest technology from the video gaming world and smartphone developments to the industries’ shop floors. Since the introduction in the mid 90’s, we have used and refined our well proven icon driven graphical user interface.
This combined with a durable touch screen to make the precision alignment task as easy and quick as possible, also for the occasional user with the Fixturlaser NXA Pro we have improved the usability even further with the OmniView function – a state-of-the-art solu-tion eliminating any doubt on how to adjust the misaligned machine. OmniView shows the machine on the screen exactly as you see the real machine regardless of where you are positioned.
The Fixturlaser NXA Pro display unit is rugged, rubber coated aluminum IP65 sealed, and ready for any alignment job. Battery capacity is well beyond the normal workday and a Quick-charge function to make it ready for the night shift.

Fixturlaser NXA Pro Sensor Units
As pioneers in using CCD technology for precision alignment, we are proud to present the Fixturlaser NXA Pro with the second genera-
tion of scientific grade sensors. This sensor technology combined with dual high-end inclinometers, and a gyroscope in each sensor unit, makes this compact unit the most accurate and precise sensor of its kind on
the market. New algorithms, a new very compact and stable housing,
and an unparalleled power management, and you have an unbeatable solution for precision alignment even in the roughest conditions.
These sensors are powered through the built-in batteries and communicate with the display unit over Bluetooth. Wireless communica-tion is preferred in most cases, but optional wires are available. The built-in gyroscopes facilitate the alignment of vertically mounted machines.

VIBRATION & BALANCE

Admin-rich — Tue, 05 Jan 2021 08:58:56 +0000

Fixturlaser SMC
Fixturlaser SMC machinery analyzer offers automatic diagnosis of machine faults, plus a built in camera, pyrometer, stroboscope and wireless tri-axial sensor.
Like no other, the Fixturlaser SMC is a portable, machinery diagnostic tool that allows mechanics and maintenance technicians to check the health of any rotating machine, as needed, in a matter of minutes.
It requires no special training or certification and generates straightforward, simple machine diagnostic reports with both confidence and severity levels.

Automatic machine diagnosis – Accurex
Fixturlaser SMC unique automatic machine diagnostic Accurex
is built into the Fixturlaser SMC. The patented machine diagnostics feature provides unbeatable fast, relevant and reliable results for a wide range of machine problems such as unbalance, alignment errors, cavitation, structural resonances, bearing problems, and more. Fixturlaser SMC machine diagnostic function differs from all other sys-tems.

Built-in laser pyrometer
Fixturlaser SMC have a built-in laser pyrometer that makes it easy to take the temperature of your machine to verify your diagnosis.

Built-in camera
For easy machine identification, sensor positioning, and report illustration

Three-axis wireless sensor
Fixturlaser SMC wireless tri-axial sensor will take readings in the vertical, horizontal and axial direction simultaneously making the measurement process fast and easy

Stroboscope
The built-in stroboscope makes it easy to pinpoint the RPM which is crucial for securing an accurate diagnosis

Fixturlaser SMC Balancing
Fixturlaser SMC Balancing is a powerful balancing tool, smart and easy to use. Fixturlaser SMC Balancer guides the user throughout the process and automates all calculations. The user is led through the user-friendly visual interface to define the machine, configure the speed counter, and select test weights.
Following the measurement proce-dure, the balancing instrument pres-ents the correct correction weights.
Fixturlaser SMC Balancing are available in balances for 1 plane, 2 plane balancing.

Fixturlaser OL2R

Admin-rich — Fri, 01 Jan 2021 08:23:39 +0000

FOR FLEXIBLE OFFLINE-TO-RUNNING
MEASUREMENTS OF CRITICAL MACHINES

Measurements of dynamic movements are used for critical machines within industries,
where large temperature differences or other disturbing factors exist. The
need for measurement of dynamic movements is often indicated by a high level of
vibrations. For some machines these high levels remain even after having performed
shaft alignment in cold condition. The Fixturlaser NXA together with the OL2R
Expansion kit helps you to overcome this costly and time consuming problem by
performing offline-to-running measurements. The measurements provide you with
machine unique target values to be used for compensation during shaft alignment.
The Fixturlaser OL2R Expansion kit consists of both software and fixtures.
The Fixturlaser OL2R fixtures are both equipped with a laser pointer, which means
that the Fixturlaser NXA alignment system is not needed in order to mount the
fixtures. Thanks to this feature the mounting can be performed fast and easy.

The offline-to-running measurement
process in short

Mount the tooling ball on each machine. Ensure
that the bolt is tighten and that the arrangement
is firmly mounted to the machine casing.
Check that the laser is adjusted to the rotational
centre by rotating the turret on each fixture.
Adjust the fixtures until both the lasers are hitting
the centre of the opposing target. Tighten
the screw on the fixture and make sure that it
is stable while rotating the turrets.
Turn off the laser beams in the fixtures and mount
the Fixturlaser NXA sensors on the posts of the
fixtures. Set the sensors so that they are approximately
at the same rotational angle when taking
the three measurements. Perform the measurement
in both cold and hot condition. Thereafter
continue with the shaft alignment using the target
values from the offline-to-running measurements.

Fixturlaser Runout Probe

Admin-rich — Thu, 31 Dec 2020 09:32:00 +0000

Fixturlaser Runout Probe
Fixturlaser Runout Probe is a battery-powered measuring probe that connects wirelessly via Bluetooth to Fixturlaser NXA display unit. The Fixturlaser Runout Probe can be used for operations like: